Foundation of glass bottles

Foundation of glass bottles
Foundation of the bottles is profitable. The bottle will be inside this foundation concrete.Durable feature, comparable with a good brick foundation.Foundation of bottles ( bottle thickness 250 mm) provides good thermal resistance.This foundation is 2 times warmer brick.Structure of the basement of the bottles has a great resistance from the big freeze. The advantage is that the glass is no shrinkage , not afraid of water . Bottle is a good thermal insulator . Bottom of the bottle is heated by the sun and gives off heat to the inside of the foundation for foundation.
 

Material bottles and delicate work will require great care.Construction begins with the preparation of the site. It is necessary to hold the markup to mark the corners with pegs . Dig a trench. Its depth is the depth of frost penetration. Making form work. Height of the foundation of the bottles such as you planned. At the bottom of the trench should be laid 20 cm sand, gravel sand over 20 cm width of the trench from 350-450 mm. At the bottom of the trench should be laid bottle tightly to each other. Bottles are placed inside the neck and the outside bottom. Otherwise it will form a prolonged, long sound in the wind.
                                         

Then the first layer of grout fill and stack the next layer of bottles. Then again, the solution . Bond bottles should be made solution of 5 parts of cement and 1 part sand .Are building the foundation of the bottles.We dry it 8:00. After drying, begin to build the walls.
Masonry of the bottles is very simple. Due to the low price of glass, foundation of the bottles, it is beneficial. For this reason, more and more often we see such a foundation.